Beware of cheap underperforming clones

As of 2023 there are many badly performing clones on the market. V2/3GHz NanoVNA uses parts like ADF4350 and AD8342 which are costly and clones have been cutting costs by using salvaged or reject parts.

See official store and look for V2 Plus4/V2 Plus4 Pro versions only to avoid getting a bad clone. We have stopped selling V2.2 versions since October 2020, so all V2 hardware that are not Plus or Plus4 are not made by us and we can not guarantee performance.

NanoVNA V2 Forum

Note: this page is a mirror of https://groups.io/g/NanoVNAV2.
Click here to join and see most recent posts.

Subject Started by Replies Last post
OK....... David Eckhardt 1 Replies 2020/12/02 09:53
by David Bradley
Fried Ch0 S11 port #hardware GM7TFP 7 Replies 2020/11/30 12:25
by GM7TFP
NanoVNA V2 phase measurements issue? hflorin 5 Replies 2020/11/29 23:44
by hflorin
Firmware from ojisankoubou in Japan John Gord 51 Replies 2020/11/29 02:45
by reuterr
NanoVNA V2plus 4 Problems in Low-Frequency Narrowband Measurement Tenko46T 2 Replies 2020/11/28 14:41
by Tenko46T
Firmware options Karl Jan Skontorp 3 Replies 2020/11/28 17:36
by Siegfried Jackstien
Is Linux version of NanoSaver better than Windows 10 for screen scaling? Hector Pascal 2 Replies 2020/11/25 20:42
by Hector Pascal
SAA2 V2 Nanovna Raymond Palmore 1 Replies 2020/11/24 14:31
by hwalker
Updated modified firmware for the 4" V2.74 from blackmagic (V2+) kd4pbs 43 Replies 2020/11/21 20:45
by Siegfried Jackstien
vna_qt software Raymond Palmore 1 Replies 2020/11/21 12:36
by Reinier Gerritsen
VNA View PC App Manual Sam Mallicoat 2 Replies 2020/11/20 08:38
by Sam Mallicoat
Which one to get? Will 17 Replies 2020/11/18 06:30
by Allasso
Serial communication with uC lincoln.aps 2 Replies 2020/11/18 01:03
by Stephen Laurence
Applying Calibration Crashes the software Barrett Poe 7 Replies 2020/11/17 20:05
by Louis Wilen
Selecting proper firmware Allasso 40 Replies 2020/11/17 15:57
by Allasso
interfacing the nanoVNA2 via libxavna-0.dll michiel 0 Replies 2020/11/17 02:13
by michiel
Which firmware version for V2.2 Plus for a 4" ST7796 ? Jempi ( ON7MA ) 4 Replies 2020/11/17 00:11
by Jempi ( ON7MA )
NanoVNAV2-Plus4 - NanoVNA Saver version required? Tripp K5TRP 1 Replies 2020/11/14 10:54
by p.thorn.ru
[External] Re: [nanovnav2] CH0 has gone noisy? Rey Machado Interte 0 Replies 2020/11/14 18:29
by Rey Machado Interte
Firmware on all V2 versions now bug fixed OneOfEleven 14 Replies 2020/11/11 12:06
by Siegfried Jackstien
NANOVNA-QT Roger 4 Replies 2020/11/11 01:47
by Roger
Isolation calibration OneOfEleven 3 Replies 2020/11/01 09:34
by Roger Need
A new video from Andreas Spies Kurt Poulsen 6 Replies 2020/11/02 01:26
by OwO
NanoVNA-QT still supported? mce66 2 Replies 2020/11/01 08:22
by Peter Ide-Kostic
Screen Capture Command to be Added to V2 FW hwalker 5 Replies 2020/10/31 22:03
by Siegfried Jackstien
notifications stopped John tf 3 Replies 2020/10/30 07:50
by John tf
information request viger3it 6 Replies 2020/10/23 12:26
by viger3it
marker schweppe 1 Replies 2020/10/23 23:37
by OwO
5" screen Martin Kratoska, OK1 3 Replies 2020/10/19 12:46
by Siegfried Jackstien
Anybody else in Australia recently bought a 2N from Zeenko? Hector Pascal 0 Replies 2020/10/18 19:35
by Hector Pascal
Calibration data for the Tindie SAA2 and the Hugen SAA-2 up to 3.8GHz Kurt Poulsen 11 Replies 2020/10/18 16:39
by Kurt Poulsen
Reminder OwO 1 Replies 2020/10/18 07:33
by John tf
NanoVNA 2.2 gives wrong results, what to do? Leif M 23 Replies 2020/10/16 18:13
by Peter KA6Z
Battery Charging Observations Bob M. 0 Replies 2020/10/16 07:12
by Bob M.
absorber materials Jim Lux 21 Replies 2020/10/15 12:47
by Peter KA6Z
component for nanoVNA γεώργιος βερόπουλος 1 Replies 2020/10/14 14:00
by Leif M
V2 Plus4 Martin Kratoska 26 Replies 2020/10/14 13:11
by Leif M
new firmware iz1fks 15 Replies 2020/10/14 12:06
by mce66
NanoVna-Saver Ver. 0.3.5 John Walton 10 Replies 2020/10/13 18:59
by David Bradley
Nano VNA V3 news? Leif M 0 Replies 2020/10/10 16:24
by Leif M
WIN 10 Issue Ted Chesley 4 Replies 2020/10/09 23:14
by Ted Chesley
Document error corrected Kurt Poulsen 1 Replies 2020/10/08 21:42
by Kurt Poulsen
Upgrading to a 4 inch screen? Adding a battery? Robert Gast 14 Replies 2020/10/08 18:12
by Siegfried Jackstien
SAA2 ojisan firmware and nanovna saver problem pe2kxh 5 Replies 2020/10/07 15:33
by David Bradley
Keysight Webinar on "Network Analyzer Fundamentals" Larry Goga 0 Replies 2020/10/05 11:41
by Larry Goga
Bluetooth on V2 Stephen Laurence 7 Replies 2020/10/04 01:02
by Hector Pascal
Shack W PC Com port Saver problems #nanovna-saver #nanovna-saver John 1 Replies 2020/10/03 11:36
by John
Strange problem with Dislord v1.0.39 firmware Alan “W2AEW” Wolke 3 Replies 2020/10/01 01:44
by Dragan Milivojevic
A contribution to avoid confusion abot dynamic range Kurt Poulsen 0 Replies 2020/09/27 12:06
by Kurt Poulsen
NanoVNA Saver 0.3.7 argument out of range Corneliu 1 Replies 2020/09/26 14:40
by David Bradley
Duplexer Tuning /Calibration Problem johnjgormley 7 Replies 2020/09/24 15:38
by Isidro Berniol
PDF Export Juan Manuel Muñoz 2 Replies 2020/09/23 22:30
by Siegfried Jackstien
Linear interpolation for calibration data on V2 DiSlord 25 Replies 2020/09/23 02:01
by Kurt Poulsen
How to safely measure an unknown PA? Robert Gast 4 Replies 2020/09/22 20:31
by John Wilkinson
NanoVNA V2 john.williams68 1 Replies 2020/09/22 12:32
by Siegfried Jackstien
installation _sofware γεώργιος βερόπουλος 1 Replies 2020/09/22 05:11
by ok1vaw
NanoVNA v2 Software. Carl.Hallberg.CHC 0 Replies 2020/09/21 17:41
by Carl.Hallberg.CHC
Noisy / erratic display. Firmware or hardware problem? John Bayley 10 Replies 2020/09/18 10:31
by John Bayley
idea for higher s21 isolation (special setup) Siegfried Jackstien 0 Replies 2020/09/17 06:15
by Siegfried Jackstien
NanoVNA_QT software - S21 phase scale issue Jean-Roger Roy 0 Replies 2020/09/16 08:43
by Jean-Roger Roy
Flash firware with NanoVNA QT Tarquin Roode 2 Replies 2020/09/15 21:06
by Siegfried Jackstien
Reference Level #documentation Bob M. 22 Replies 2020/09/15 11:53
by switchabl
W10 bug Kurt Poulsen 0 Replies 2020/09/15 12:10
by Kurt Poulsen
A w10 update bug Kurt Poulsen 0 Replies 2020/09/15 12:10
by Kurt Poulsen
Where to buy? 4-inch display, case, battery, SMA David J Taylor 40 Replies 2020/09/15 11:08
by Kurt Poulsen
The new release of 09092020 for V2_2 Kurt Poulsen 66 Replies 2020/09/14 13:47
by Kurt Poulsen
trembling data when measuring up to 100MHz ok1vaw 25 Replies 2020/09/14 00:28
by ok1vaw
SWR Vincenzo Mone 4 Replies 2020/09/13 21:28
by Tarquin Roode
V2 from OwoCom from Tindie -port s21 matching ok1vaw 9 Replies 2020/09/13 03:19
by Kurt Poulsen
Antenna analyzer function Rafael Fagan 5 Replies 2020/09/12 17:52
by Roger Need
NanoVna-Saver - reference plane shift and feeding cable elimination help? ok1vaw 3 Replies 2020/09/09 16:37
by Kurt Poulsen
Impedance matching with NanoVNA vincent 6 Replies 2020/09/08 08:44
by frankstir
Port 2 return loss OwO 0 Replies 2020/09/08 21:10
by OwO
NanoVNA-saver 0.3.7 crash on second day of use. Tony VK3ZTR 1 Replies 2020/09/08 05:44
by ok1vaw
4" display cannot select Touch Cal Marcus Gustafsson 5 Replies 2020/09/06 22:32
by Siegfried Jackstien
V2.2 Stuck at white LCD but no USB device registers George Joseph 7 Replies 2020/09/04 07:44
by George Joseph
Official group moved to groups.io/g/NanoVNAV2 OwO 0 Replies 2020/09/04 04:04
by OwO
https://ojisankoubou.web.fc2.com/, revisited John Gord 1 Replies 2020/09/03 15:50
by switchabl
S-A-A-2 Battery Charging Questions #battery Bob M. 3 Replies 2020/09/01 22:11
by Isidro Berniol
finding antenna resonance frequency continuously garyspang 1 Replies 2020/08/30 10:07
by Roger Need
VNA V2 Accuracy stewartrabinowitz 2 Replies 2020/08/30 11:58
by Stewart Rabinowitz
NanoVNA V2 battery joe.roseberry 3 Replies 2020/08/22 09:16
by OwO
Building S-A-A-2 from scratch for external test set configuration (like "Option 011") - specialized/difficult parts required? David Feldman 18 Replies 2020/08/21 11:39
by David Feldman
NANOVNA-SAVER_V0.3.7 John Walton 1 Replies 2020/08/20 21:53
by David Bradley
NanoVNA 2 David Bradley 0 Replies 2020/08/20 00:56
by David Bradley
S21 oddity while measuring an LNA sdturne 2 Replies 2020/08/17 20:07
by sdturne
Metal case Andres Ogayar 2 Replies 2020/08/16 07:29
by John tf
Kendall Branch of NanoVNA-QT hwalker 5 Replies 2020/08/14 11:50
by Perdad
Settings not savable Klaus Wörner 23 Replies 2020/08/14 18:03
by Siegfried Jackstien
Saa2 output port attenuator Stephen Laurence 3 Replies 2020/08/12 06:08
by Stephen Laurence
NanoVNA2 Vincenzo Mone 7 Replies 2020/08/10 18:50
by Reinier Gerritsen
Help on measurements Vincenzo Mone 1 Replies 2020/08/09 07:51
by hwalker
Broadcast Interference EMI Bonnie KQ6XA 0 Replies 2020/08/08 19:54
by Bonnie KQ6XA