Beware of cheap underperforming clones
As of 2023 there are many badly performing clones on the market. V2/3GHz NanoVNA uses parts like ADF4350 and AD8342 which are costly and clones have been cutting costs by using salvaged or reject parts.
See official store and look for V2 Plus4/V2 Plus4 Pro versions only to avoid getting a bad clone. We have stopped selling V2.2 versions since October 2020, so all V2 hardware that are not Plus or Plus4 are not made by us and we can not guarantee performance.
NanoVNA V2 Forum
Note: this page is a mirror of https://groups.io/g/NanoVNAV2.
Click here to join and see most recent posts.
| Subject | Started by | Replies | Last post | |
 |
Should I upgrade my firmware? Just received NanoVNA V2Plus4 version : git-20210530-412578c | Walter Egenmaier | 23 Replies | 2022/01/11 20:20 by Albrecht Debelak |
|
FW: Re: Re: [nanovnav2] Should I upgrade my firmware? Just received NanoVNA V2Plus4 version : git-20210530-412578c | Gary Cobb | 1 Replies | 2022/01/11 03:44 by Walter Egenmaier |
|
I tried to see what my SWR and Smith Chart on my rubber duck antenna for FT-70D and got VERY high SWR readings...is it because it is a dual antenna for 70cm as well as 2m? | Walter Egenmaier | 13 Replies | 2022/01/11 02:20 by W0LEV |
 |
Trusted Known Resellers to buy for... | Shadow | 1 Replies | 2022/01/09 15:31 by Shadow |
|
Trying to update firmware | Jean-Francois Somerv | 3 Replies | 2022/01/09 10:42 by Jean-Francois Somerv |
|
Calibration jig | S Johnson | 6 Replies | 2022/01/09 09:21 by Jim Lux |
|
When calibrating THRU, is that the double female SMA connector or something else? | Walter Egenmaier | 17 Replies | 2022/01/09 09:12 by Jim Lux |
|
NanovnaSaver crash after 1port calibration with NanoVNA V2s #nanovna-saver #nanovna-saver | OK1VAW | 1 Replies | 2022/01/09 04:12 by OK1VAW |
|
Input protection | J. chang | 4 Replies | 2022/01/06 07:50 by Galvin Franks |
|
How do you jog left of right or left while using the VNA Q-T software and the V2P4 is connected to the USB port on a laptop? | Walter Egenmaier | 1 Replies | 2022/01/06 10:27 by F1RVC |
|
Just got my V2Plus4 today and checking out all my SWRs of all my antennas and having a blast...question | Walter Egenmaier | 13 Replies | 2022/01/05 19:37 by Walter Egenmaier |
|
NanoVNA-QT funcion | Francesco | 0 Replies | 2022/01/05 00:57 by Francesco |
|
About calibration | ese54 | 0 Replies | 2022/01/04 04:32 by ese54 |
|
Calculating L and C values for Matching PI filter using NanoVNA | dave | 9 Replies | 2022/01/03 15:15 by dave |
|
UK based and Want to buy a Nanovna V2 Plus 4, is Aliexpress or eBay safe? | Dale Robins - 2W0ODS | 7 Replies | 2022/01/02 07:35 by gc 1000fix |
|
"Error reading version registers" from NanoVNA-Saver #nanovna-saver | Dave Johnson | 2 Replies | 2022/01/01 08:59 by Dave Johnson |
|
#clones | vittel | 7 Replies | 2022/01/01 04:14 by vittel |
|
Ordered V2 Plus4 today...can anyone tell me where I can find a carrying case made for this? No luck online finding one | Walter Egenmaier | 8 Replies | 2021/12/30 18:08 by W0LEV |
|
Update firmware on NaniVNA V2 Plus4 | Rob Derlagen | 4 Replies | 2021/12/30 04:06 by Rob Derlagen |
|
Last FW of Git only LCD does not work normally | softhyunji | 5 Replies | 2021/12/28 20:44 by DiSlord |
|
No ship to Guatemala from Tindie.com looking for reseller of NanoRFE.com products #clones? | Shadow | 7 Replies | 2021/12/28 06:41 by OwO |
|
Shipping from Tindie to USA questions | Andrew Beyer | 2 Replies | 2021/12/25 04:51 by Michael Brun |
|
New software for NanoVNA V2 | UR5FFR | 10 Replies | 2021/12/23 23:36 by aleks07111971 |
|
Db range | johnjgormley | 5 Replies | 2021/12/23 04:49 by OwO |
|
Swap ports on VNA View software | Francesco | 6 Replies | 2021/12/22 16:41 by Francesco |
|
2 quick questions | Tim K4SHF | 5 Replies | 2021/12/19 15:35 by Tim K4SHF |
|
Hard reset for NanoVna H v 1.0 | Ed Oxer, W8EO | 0 Replies | 2021/12/19 10:30 by Ed Oxer, W8EO |
|
How to measure the real GPS signal on NanoVNA? | Kevil | 14 Replies | 2021/12/18 03:17 by Kevil |
|
Greetings - new NanoVNA V2 Plus4 Owner | Ben Hall | 8 Replies | 2021/12/14 05:25 by aleks07111971 |
|
Lower LNA Gain measured on NanoVNA Saver (ADF4350 TX POWER setting not available) | Kevil | 3 Replies | 2021/12/10 14:32 by Kevil |
|
NanoVNA-F V2 error FR_NO_FILESYSTEM | SAGILIGA | 0 Replies | 2021/12/03 06:58 by SAGILIGA |
|
File Notifications #file-notice | NanoVNAV2 | 0 Replies | 2021/12/03 05:00 by NanoVNAV2 |
|
Please some idea abaut | Francesco | 0 Replies | 2021/11/29 09:43 by Francesco |
|
Test Msg | Mike C. | 0 Replies | 2021/11/28 14:19 by Mike C. |
|
LC resonance "sonde" | Wojtek SP9WPN | 2 Replies | 2021/11/26 02:50 by Wojtek SP9WPN |
|
Trasfer relay erros solved | Francesco | 1 Replies | 2021/11/23 06:57 by John Galbreath |
|
Quick question about device. | Daniel Fox | 4 Replies | 2021/11/19 20:36 by stevenmclark1 |
|
TDR range and resolution | John Galbreath | 38 Replies | 2021/11/12 04:52 by Joe Smith |
|
Please some help to integrate trasfere relay | Francesco | 20 Replies | 2021/11/11 13:39 by Guido ON7CH |
|
EXT:Re: [nanovnav2] Preview of my latest software updates | Dorgau, Marcus | 2 Replies | 2021/11/08 04:46 by Joe Smith |
|
VNA output level? | Paul Randall G3NJV | 25 Replies | 2021/11/06 19:44 by Joe Smith |
|
Help on understanding the power detector | o.a.aldhaibani | 3 Replies | 2021/11/04 04:17 by Jim Lux |
|
T Check | Francesco | 0 Replies | 2021/11/01 07:23 by Francesco |
|
FAIRRITE MATERIAL DETERMINATION of TOROIDS | W0LEV | 0 Replies | 2021/10/31 20:26 by W0LEV |
|
NanoVNA SAA2 wont go into USB MODE | John Birdlebough - K | 1 Replies | 2021/10/29 20:56 by Jim Lux |
|
VNA Save and Qt close immediately after opening connects to VNA2PLus4 | WA2TP | 0 Replies | 2021/10/29 14:25 by WA2TP |
|
Error message from groups.io | Jim Lux | 0 Replies | 2021/10/24 07:33 by Jim Lux |
|
using the NanoVNA only from the USB supply | Francesco | 1 Replies | 2021/10/22 13:37 by OK1VAW |
|
Help for NanoVNA 2/4 | Francesco | 2 Replies | 2021/10/20 20:53 by Francesco |
|
NanoVNA-Saver Graticule | Teton Amateur Radio | 1 Replies | 2021/10/15 17:52 by Jim Fuler (N7VR) |
|
Input protector for the NanoVNA with the TVS diodes | OK1VAW | 2 Replies | 2021/10/15 10:15 by Reinier Gerritsen |
|
NanoVNA connetion with HP S parameter test set | Francesco | 13 Replies | 2021/10/12 20:37 by Joe Smith |
|
Help on understanding the NanoVNA v2 wheatstone bridge design | spam | 2 Replies | 2021/10/04 19:07 by Roger Henderson |
|
Do I have a genuine nanoVNA 2? #clones | jorgen | 1 Replies | 2021/09/28 06:23 by OwO |
|
s11 Measurements below 142 MHz | Mike, AA9VI | 1 Replies | 2021/09/27 10:35 by OwO |
|
LabView Nano VNA hangs up on low number of sweep points | John Galbreath | 11 Replies | 2021/09/26 18:35 by Joe Smith |
|
how to measure coil/filter inductance with NanoVNA v2 plus4 | sq8guo | 5 Replies | 2021/09/26 09:42 by Roger Need |
|
Ripple in S21 response of a Noolectric LANA | bwschober | 3 Replies | 2021/09/26 03:42 by Dirk |
|
Using NanoVNA Saver to capture continuous sweep data #nanovna-saver | mrest | 5 Replies | 2021/09/24 05:21 by Joe Smith |
|
T-Check with LabView NanoVNA | John Galbreath | 17 Replies | 2021/09/21 10:43 by Joe Smith |
|
nanaVNA TDR distance resolution | Dave Brown | 7 Replies | 2021/09/14 20:59 by John Galbreath |
|
problem with firmware update for nanovna v2 | Scott KF7GGN | 2 Replies | 2021/09/12 04:05 by Vladimir Lebedev |
|
File /Impedance Matching EBook - July 2021.pdf uploaded #file-notice | NanoVNAV2 | 1 Replies | 2021/09/08 17:02 by W0LEV |
|
Too much noise in nanovna V2 | faheem wani | 6 Replies | 2021/09/07 10:38 by Raj vu2zap |
|
New V2Plus4 2 of 3 buttons don't work | nanovna2rfe | 18 Replies | 2021/09/05 21:14 by David Bradley |
|
Display shows vertical line | D Solt | 1 Replies | 2021/09/02 19:42 by OwO |
|
V2 Plus Firmware | Joe Smith | 16 Replies | 2021/08/30 09:02 by Jim Lux |
|
LabView NanoVNAm | METRA FLORENT | 1 Replies | 2021/08/25 14:51 by METRA FLORENT |
|
LabView NanoVNA | John Galbreath | 5 Replies | 2021/08/25 05:06 by Lou W7HV |
|
NanoVNA V2 - lower frequency limit | Dirk | 0 Replies | 2021/08/24 02:26 by Dirk |
|
Calibration with VNA-QT and with NanoVNA-saver | Dirk | 6 Replies | 2021/08/24 02:11 by Dirk |
|
DOA? | la6gh | 7 Replies | 2021/08/23 10:06 by la6gh |
|
Lab View Nano VNA system - transfer relay and negative resistance | John Galbreath | 5 Replies | 2021/08/22 09:06 by Joe Smith |
|
Totally Confused!!! but I finally got a driver to work! | Ray | 0 Replies | 2021/08/22 09:52 by Ray |
|
Spaghetti display fixed | stevenmclark1 | 0 Replies | 2021/08/21 21:56 by stevenmclark1 |
|
Driver issues | Ray | 0 Replies | 2021/08/20 05:11 by Ray |
|
nanoVNA-QT extrememly slow to respond to clicks | Lou W7HV | 4 Replies | 2021/08/15 06:21 by Lou W7HV |
|
capturing real and imaginary values of s11 and s21 | jnv jc | 4 Replies | 2021/08/14 18:39 by David Eckhardt |
|
Lab View Nano VNA system | John Galbreath | 6 Replies | 2021/08/12 10:40 by Joe Smith |
|
Clone or not? NanoVNA-F V2 | n3cga | 2 Replies | 2021/08/11 09:14 by Alex |
|
NanoVNA V2Plus4 requires extra sleep nanovna-saver on Linux #nanovna-saver | sumpster | 2 Replies | 2021/08/11 07:24 by Jim Lux |
|
NanoVNA V2.2 does not work Cal shows scribbled graph all over | jaco.dutoit | 5 Replies | 2021/08/03 21:03 by N8AUM |
|
Compared the nanoVNA 2 Plus4 to a FieldFox | John AE5X | 6 Replies | 2021/08/03 03:46 by mce66 |
|
Relationship between step resolution and sweep range? | TomS | 5 Replies | 2021/08/01 21:08 by DiSlord |
|
PROCEDURES for MEASURING DM LOSS and CM ATTENUATION of CMCs | Siegfried Jackstien | 7 Replies | 2021/08/01 12:04 by David Eckhardt |
|
The Amplitude jumping issue | Kurt Poulsen | 7 Replies | 2021/07/29 03:26 by Brian Flynn GM8BJF |
|
Nano VNA Saver 3.9 | canale | 4 Replies | 2021/07/28 00:37 by canale |
|
Decided to buy the old v2 S-A-A-2. What are some good sources? The new V4 is awesome, but just too expensive for a college student heh. | bling | 2 Replies | 2021/07/27 20:05 by OwO |
|
Trouble with NANO VNA Saver | TGundo 2003 | 9 Replies | 2021/07/23 18:48 by John Zhong |
|
vary output level | John Galbreath | 2 Replies | 2021/07/21 17:47 by N8AUM |
|
Odd readings--hardware issue? | Charlie Lofgren | 8 Replies | 2021/07/21 05:56 by Lou W7HV |
|
Set intermediate frequency and FIFO | marc.jofre | 1 Replies | 2021/07/18 13:17 by Jim Allyn - N7JA |
|
Raw data of the measurement | marc.jofre | 0 Replies | 2021/07/17 23:24 by marc.jofre |
|
Power output and P2 to P1 Cross Talk | Weinreb, Sander | 2 Replies | 2021/07/13 14:44 by mce66 |
|
PDN measurement software | Joe Smith | 19 Replies | 2021/07/11 13:11 by Joe Smith |
|
V2 Plus4 firmware for measuring crystals (https://ojisankoubou.web.fc2.com/) | OwO | 5 Replies | 2021/07/10 22:39 by Bobinuta Bobinel |
|
NEED HELP!! How to log raw data from nanoVNA V2 real time! #nanovna-saver | zhenghuanpeng | 1 Replies | 2021/07/09 15:36 by Joe Smith |
|
automating NanoVNA saverRe: [nanovnav2] Python or Matlab file for nanoVNA SAA2 | Jim Lux | 2 Replies | 2021/07/06 09:47 by Jim Lux |
|
Python or Matlab file for nanoVNA SAA2 | Khalid Ibne Masood K | 2 Replies | 2021/07/06 14:26 by Albert Kleyn |