Beware of cheap underperforming clones
As of 2023 there are many badly performing clones on the market. V2/3GHz NanoVNA uses parts like ADF4350 and AD8342 which are costly and clones have been cutting costs by using salvaged or reject parts.
See official store and look for V2 Plus4/V2 Plus4 Pro versions only to avoid getting a bad clone. We have stopped selling V2.2 versions since October 2020, so all V2 hardware that are not Plus or Plus4 are not made by us and we can not guarantee performance.
NanoVNA V2 Forum
Note: this page is a mirror of https://groups.io/g/NanoVNAV2.
Click here to join and see most recent posts.
Calibration Procedure for Waveguide Using Agilent N4373D VNA
Saud Aldhafyan 2025/06/25 11:07
Hello
I am currently using an Agilent N4373D Vector Network Analyzer (VNA) and would like to calibrate a waveguide measurement setup. I would appreciate it if you could guide me through the recommended calibration procedure for waveguide measurements using this specific VNA.
Thank you for your support
To reply to this topic, join https://groups.io/g/NanoVNAV2
View this thread on groups.io