Is frustrating to get problems with firmware with the V2plus4  I don't get the opportunity to load the calibration standard feature to have better calibration.
The device became less util for this firmware issue.
I hope the team from Nanoforte resolve this problem a soon as possible.

For our information, what firmware number is creating the calibration
problems?

Thanks.

El lun., 17 ene. 2022 11:15, Francesco <realfran@gmx.co.uk> escribió:

> Is frustrating to get problems with firmware with the V2plus4 I don't get
> the opportunity to load the calibration standard feature to have better
> calibration.
> The device became less util for this firmware issue.
> I hope the team from Nanoforte resolve this problem a soon as possible.
>
>

Neither of the 2 windows software GUIs show any place to upgrade the firmware. The manual is very poorly written for this, maybe you have to use the linux version to update?

*I continue with the impossibility to upgrade the firmware on my device, the bootloader is blocked to close the possibility to use different firmware, this reduces the possibility to get better use of theV2 plus4.
Please provide the possibility to open the boot-loader to use different firmware.* *This personal dispute go to damage the owner of NanoVNA v.2plus4 buyer and in the end, go to damage the seller,*

Clones complicate everything, however, NanoQT software was (in my experience) the easy way to update firmware.  Good luck !

V2plus4 is not a clone



Am 07.02.2022 18:13 schrieb "John Galbreath via groups.io"
<nc0gnit0=yahoo.com@groups.io>:

> Clones complicate everything, however, NanoQT software was (in my
experience) the easy way to update firmware. Good luck !



_._,_._,_

* * *